MITSUBISHI CHALLENGER PB
LEVELLING KIT
- 40mm front lift
- Fully assembled front struts
- Shortened UCA bump stops
- Rear shocks
- Compatible with stock UCAs
- Sport or Dynamic Tune
- Retain OEM rear springs
- No rear lift
LIFT KIT
- 40mm front and rear lift
- Fully assembled front struts
- Shortened UCA bump stops
- Rear Shocks
- Rear Coil Springs
- Compatible with stock UCAs
- Sport or Dynamic Tune
- Polyair Air Bag Option ($295)
KIT OPTIONS
LEVELLING KITS – There are three front suspension options (stages) available to suit your vehicle’s setup, noting that your vehicle’s stock rear springs are retained with this kit. A pair of new rear shock absorbers is supplied as part of this kit, to match the tune (Sport or Dynamic) selected for the front. Our rear shock absorbers are suitable for a 0-50mm lift, so upgrading the rear springs down the track won’t require new shock absorbers provided you don’t go higher than 50mm. Click here for more information about our levelling kits.
LIFT KITS – There are three front and three rear options (stages) available. Any of the three front options can be combined with any of the three rear options to create a suspension kit that best suits your vehicle set up and use. We recommend air bags are used in the rear if constant load and/or towball weight is 200kg+. Click here for more information about our lift kits.
STAGE ONE TO THREE OPTIONS – The only difference between each of the stages is the springs that are used, which will be appropriate to deal with the weight of the vehicle’s accessories and any additional permanent or temporary constant load. Click here for more technical information about our suspension systems.
Front Suspension
Rear Suspension
Stage ONE
Stage ONE
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with stock front bumper / alloy nudge bar / alloy bullbar (no winch)
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear coil springs.
Suits: 0 – 300kg constant load
Lift: 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with stock front bumper / alloy nudge bar / alloy bullbar (no winch)
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 0 – 300kg constant load
Lift: Choice of 20mm or 40mm (approximately)
Stage TWO
Stage TWO
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar (no winch)
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear coil springs.
Suits: 300 – 400kg constant load
Lift: 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar (no winch)
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 300 – 500kg constant load
Lift: Choice of 20mm or 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar (no winch)
Lift: 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar (no winch)
Lift: 40mm (approximately)
Stage THREE
Stage THREE
Overland HEAVY
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar and winch
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear coil springs.
Suits: 400kg+ constant load
Lift: 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar and winch
Lift: 40mm (approximately)
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 500+kg constant load
Lift: Choice of 20mm or 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar and winch
Lift: 40mm (approximately)
Includes: Fully assembled struts (pair) with reduced height upper bump stop kit
Suits: Vehicles with steel bullbar and winch
Lift: 40mm (approximately)
Rear Suspension
Stage ONE
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 0 – 300kg constant load
Lift: 40mm (approximately)
Stage TWO
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 300 – 500kg constant load
Lift: 40mm (approximately)
Stage THREE
Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.
Suits: 500kg+ constant load
Lift: 40mm (approximately)