MITSUBISHI TRITON MQ – MR 2015+

LEVELLING KIT

$1270*
  • 40mm front lift
  • Fully assembled front struts
  • Shortened UCA bump stops
  • Rear shocks
  • Retains OEM rear springs
  • No rear lift
  • No tailshaft spacer required
  • Compatible with stock UCAs
  • Sport or Dynamic Tune

LIFT KIT

$2310*
  • 40mm front and rear lift
  • Fully assembled front struts
  • Shortened UCA bump stops
  • Rear Shocks
  • Rear Leaf Springs
  • Rear spring fitting kit
  • Tailshaft spacer included
  • Compatible with stock UCAs
  • Sport or Dynamic Tune

FORTY20

$2310*
  • 40mm front 20mm rear lift
  • Fully assembled front struts
  • Shortened UCA bump stops
  • Rear shocks
  • Rear leaf springs
  • Rear spring fitting kit
  • Tailshaft spacer included
  • Compatible with stock UCAs
  • Sport or Dynamic Tune

KIT OPTIONS

LEVELLING KITS – There are three front suspension options (stages) available to suit your vehicle’s setup, noting that your vehicle’s stock rear springs are retained with this kit. A pair of new rear shock absorbers is supplied as part of this kit, to match the tune (Sport or Dynamic) selected for the front. Our rear shock absorbers are suitable for a 0-50mm lift, so upgrading the rear springs down the track won’t require new shock absorbers provided you don’t go higher than 50mm. Click here for more information about our levelling kits.

LIFT KITS (Including Forty20) – There are three front and three rear options (stages) available. Any of the three front options can be combined with any of the three rear options to create a suspension kit that best suits your vehicle set up and use. Our standard lift kit is 40mm both front and back, but there is also an option with Triton to raise the front 40mm and the rear 20mm, using our FORTY20 lift kit. Click here for more information about our lift kits.

STAGE ONE TO THREE OPTIONS – The only difference between each of the stages is the springs that are used, which will be appropriate to deal with the weight of the vehicle’s accessories and any additional permanent or temporary constant load. Click here for more technical information about our suspension systems.

Front Suspension

Rear Suspension

Stage ONE

Stage ONE

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with stock front bumper / alloy nudge bar / alloy bullbar (no winch)

Lift: 40mm (approximately)

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 0 – 300kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with stock front bumper / alloy nudge bar / alloy bullbar (no winch)

Lift: 40mm (approximately)

Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.

Suits: 0 – 300kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Stage TWO

Stage TWO

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar (no winch)

Lift: 40mm (approximately)

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 300 – 500kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar (no winch)

Lift: 40mm (approximately)

Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.

Suits: 300 – 500kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar (no winch)

Lift: 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar (no winch)

Lift: 40mm (approximately)

Stage THREE

Stage THREE

Overland HEAVY

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar and winch

Lift: 40mm (approximately)

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 500kg+ constant load

Lift: Choice of 20mm or 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar and winch

Lift: 40mm (approximately)

Includes: Two rear shock absorbers and two rear leaf springs with fitting kits.

Suits: 500+kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar and winch

Lift: 40mm (approximately)

Includes: Fully assembled struts (pair) with reduced height upper bump stop kit

Suits: Vehicles with steel bullbar and winch

Lift: 40mm (approximately)

Rear Suspension

Stage ONE

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 0 – 300kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Stage TWO

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 300 – 500kg constant load

Lift: Choice of 20mm or 40mm (approximately)

Stage THREE

Includes: 2 x rear shock absorbers. 2 x rear leaf springs & fitting kits. 1 x tailshaft spacer.

Suits: 500kg+ constant load

Lift: Choice of 20mm or 40mm (approximately)